Jump to content

diamond proportions


Recommended Posts

I recently received a GIA certified 1.61 carat H VVS2 princess cut diamond with a table of 68.4% a table of 65% "very good" symmetry and polish and a l to w ratio of 1.02 no flourescence and no cutlet with a medium girdle but I don't have the crown height measurement. How important is the crown height to the fire and brilliance of a diamond. Also, what is the minimum crown height this diamond should have?

Link to comment
Share on other sites

Are you trying to find out if the certificate is good, or how preety your diamond is?

Read my post and you will understand why I am asking you this question. I will paste it to you so you don't have to look for it:



My name is Shahar Dahari.

I am in the diamond business since I was 12 years old.

I am a former diamond cutter, gemologist, and rough diamond designer.


When I came to US from Israel in 1998 I worked with a diamond wholesale company. For the first time I started dealing with jewelers all over the country.

I was shocked to find that most jewelers can not tell diamond beauty, accuracy and quality. Jewelers, like customers depend on certificate to tell them how "good" the diamond is.

Certificates are only good for determining color, measurements, angles, and treatments.

Clarity is very difficult to grade since some SI2 stones can be invisible to the naked eye and some don't.

Cut, symmetry, and polish grades in 80% of cases will not give you the right picture of how sparkly the diamond is.


Certificates do not specify quality of rough, which is very crucial with what we call "spark". Your stone can be EX EX Ideal and still be "dead".


Some deep cut stones can be "dead" and some "full of life".

For instance. When stone is deep, one thing that will make a big difference on the brilliance is why the stone is deep. Is the pavilion deep? Is the girdle very thick? Is the crown too high?


Buying a stone just according to the certificate is like buying a used car according to the mileage and the body condition. In the diamond business, only small percentage of jewelers know how to check the engine.


My advice:

If you are planning to buy a diamond over the internet do two things:

1. Ask to vendor to provide you with good quality picture of the diamond and full description.

2. Show the picture to a professional. Professional will look at the proportions, reflections (From the diamond reflections you can learn a lot), facets size, and style.


If you find the stone you are looking for, I will be happy to give you my opinion.


Good luck,



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...